.. |br| raw:: html

    <br />


.. |prein| raw:: html

    <pre>


.. |preout| raw:: html

    </pre>


crypto
``````

ethip4
''''''

2n1l-10ge2p1x710-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy
..........................................................................

2n1l-10ge2p1x710-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy
..........................................................................

**IPv4 IPsec tunnel mode test suite.**

- **[Top] Network topologies:** TG-DUT1 2-node topology with one link between nodes.

- **[Cfg] DUT configuration:** On DUT1 create loopback interface, configure loopback an physical interface IPv4 addresses, static ARP 
ecord, route and IPsec manual keyed connection in tunnel mode.

- **[Ver] TG verification:** ETH-IP4 packet is sent from TG to DUT1. Packet is received on TG from DUT1.

- **[Ref] Applicable standard specifications:** RFC4303.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.csv}


2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy
.........................................................................

2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy
.........................................................................

**IPv4 IPsec tunnel mode test suite.**

- **[Top] Network topologies:** TG-DUT1 2-node topology with one link between nodes.

- **[Cfg] DUT configuration:** On DUT1 create loopback interface, configure loopback an physical interface IPv4 addresses, static ARP irecord, route and IPsec manual keyed connection in tunnel mode.

- **[Ver] TG verification:** ETH-IP4 packet is sent from TG to DUT1. Packet is received on TG from DUT1.

- **[Ref] Applicable standard specifications:** RFC4303.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.csv}


2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-scapy
............................................................................

2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-scapy
............................................................................

**IPv4 IPsec tunnel mode test suite.**

- **[Top] Network topologies:** TG-DUT1 2-node topology with one link between nodes.

- **[Cfg] DUT configuration:** On DUT1 create loopback interface, configure loopback an physical interface IPv4 addresses, static ARP 
ecord, route and IPsec manual keyed connection in tunnel mode.

- **[Ver] TG verification:** ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.

- **[Ref] Applicable standard specifications:** RFC4303.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-scapy.csv}


2n1l-10ge2p1x710-ethip4ipsec1tptsw-ip4base-policy-aes128cbc-hmac512sha-scapy
............................................................................

2n1l-10ge2p1x710-ethip4ipsec1tptsw-ip4base-policy-aes128cbc-hmac512sha-scapy
............................................................................

**IPv4 IPsec transport mode test suite.**

- **[Top] Network topologies:** TG-DUT1 2-node topology with one link between nodes.

- **[Cfg] DUT configuration:** On DUT1 create loopback interface, configure loopback an physical interface IPv4 addresses, static ARP 
ecord, route and IPsec manual keyed connection in transport mode.

- **[Ver] TG verification:** ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.

- **[Ref] Applicable standard specifications:** RFC4303.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip4ipsec1tptsw-ip4base-policy-aes128cbc-hmac512sha-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip4ipsec1tptsw-ip4base-policy-aes128cbc-hmac512sha-scapy.csv}


ethip6
''''''

2n1l-10ge2p1x710-ethip6ipsec1tnlsw-ip6base-policy-aes128cbc-hmac512sha-scapy
............................................................................

2n1l-10ge2p1x710-ethip6ipsec1tnlsw-ip6base-policy-aes128cbc-hmac512sha-scapy
............................................................................

**IPv6 IPsec tunnel mode test suite.**

- **[Top] Network topologies:** TG-DUT1 2-node topology with one link between nodes.

- **[Cfg] DUT configuration:** On DUT1 create loopback interface, configure loopback an physical interface IPv6 addresses, static ARP 
ecord, route and IPsec manual keyed connection in tunnel mode.

- **[Ver] TG verification:** ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.

- **[Ref] Applicable standard specifications:** RFC4303.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip6ipsec1tnlsw-ip6base-policy-aes128cbc-hmac512sha-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip6ipsec1tnlsw-ip6base-policy-aes128cbc-hmac512sha-scapy.csv}


2n1l-10ge2p1x710-ethip6ipsec1tptsw-ip6base-policy-aes128cbc-hmac512sha-scapy
............................................................................

2n1l-10ge2p1x710-ethip6ipsec1tptsw-ip6base-policy-aes128cbc-hmac512sha-scapy
............................................................................

**IPv6 IPsec transport mode test suite.**

- **[Top] Network topologies:** TG-DUT1 2-node topology with one link between nodes.

- **[Cfg] DUT configuration:** On DUT1 create loopback interface, configure loopback an physical interface IPv6 addresses, static ARP 
ecord, route and IPsec manual keyed connection in transport mode.

- **[Ver] TG verification:** ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.

- **[Ref] Applicable standard specifications:** RFC4303.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip6ipsec1tptsw-ip6base-policy-aes128cbc-hmac512sha-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip6ipsec1tptsw-ip6base-policy-aes128cbc-hmac512sha-scapy.csv}